RTS XCP-ADAM-MC Dokumentacja Pobierz pdf (Strona 10)

rtsintercoms.com

MCII-e

Ethernet Master Controller Card Kit

for ADAM

The RTS

MCII-e system controller card is the latest generation controller

for the ADAM intercom system. The Ethernet connectivity enables multiple

AZedit sessions and remote peripherals such as the GPIO-16 (page 28).

Adding Ethernet connectivity between the ADAM intercom and a PC running

AZedit configuration software, the new controller can support up to 35

simultaneous AZedit sessions (32 using Ethernet and up to 3 using serial

ports). Using a pair of MCII-e controller cards will provide full redundancy

with seamless automatic changeover upon failure. The speed of Ethernet,

combined with expanded memory, allows the card to fully support large

matrices with reduced setup file download time. As with all ADAM intercom

family products, the MCII-e card supports all standard, hot swappable, and

configurable features through the AZedit configuration software. It is fully

compatible with existing ADAM systems and cards, including AIO-8, AIO-16,

AES- 3, and RVON VoIP interfaces. The MCII-e also supports SNMP, the IETF

standard protocol for monitoring network-attached devices.

AIO-16

16-Port Analog I/O Card Kit for ADAM

Installed directly into the ADAM matrix intercom system, the AIO-16 card

gives 16 ports of audio IN and OUT plus individual data drivers for each port

installed in the system. This doubles the amount of audio ports available from

its predecessor the AIO-8. In addition, the AIO-16 supports connections up

2.2mi (3.5km) per port. The AIO-16 is hot swappable, allowing the user to

insert the card and begin using it instantaneously. The AIO-16 eliminates

the need to manually set keypanel addresses by enabling automated

unique addressing, which greatly reduces the setup time. Once inserted

into the system, it uses its “smart card” capability to see the back card

configuration and switches its keypanel communication protocol accordingly.

To support the AIO-16, the ADAM frame must be equipped with the

new high-current power supply.

AES-3

Digital Audio Interface Card Kit for ADAM

The AES-3 digital audio interface card expands the connectivity to the

ADAM intercom by supporting AES-3 over coaxial cable. It supports four

audio channels through eight AES-3 connections. The AES-3 card provides

connectivity to any other third party AES-3 audio device. It supports all standard

hot swappable and configurable features within the ADAM intercom family.

This card supports incoming sample rates from 16 kHz to 108 kHz with

24-bit audio. Outputs are compatible with all AES-3 standards. Along with

the RVON-16 VoIP card, the RTS

ADAM intercom systems natively support

analog, AES-3 digital and VoIP signal formats.

Interface Cards

The RTS

interface cards are the core of the

modular digital matrix intercom concept. An

array of features and connectivity options

means you can customize your ADAM matrix to

integrate seamlessly into your communications

network. Each new generation provides

expanded possibilities for your existing ADAM

frame, solidifying its investment value for years

to come. With features such as hot swap and

SNMP support, the ADAM subassemblies ensure

that you can scale your intercom system to fit

your growing needs with peace of mind.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

RTS XCP-ADAM-MC Dokumentacja Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony RTS XCP-ADAM-MC