RTS XCP-ADAM-MC Instrukcja Użytkownika Pobierz pdf (Strona 23)

TABLE 2. RVON-C status descriptions

Action Display

When Ethernet is selected:

Link Up - Displays whether the Ethernet link is active or inactive. Link Up = Active, Link

Down = Inactive

Speed - Displays the connection speed in mbps. Can be either 10 mbps or 100 mbps

Mode - Displays whether the connection is Half Duplex (data moves in one direction) or

Full Duplex (data moves in both directions).

Auto-Negotiate

- Automatically determines the Ethernet speed and mode, and then adjusts settings accordingly.

When Serial is selected:

IP - Displays the IP Address of where the transfer is being sent.

Baud - Displays the connection speed of the RVON-C.

To Net - Displays the number of bytes that have been transferred from the serial port.

To Ser - Displays the number of bytes that have been transferred to the serial port.

When VoIP Channel is

selected

VoIP. . . . . . . . - displays the channel connection status to other RVON devices. The

channel connection shows connections to RVON-8, RVON-I/O,

RVON-1, RVON-C, and VKP.

Each dot (or checkmark) represents a channel connection. There are

eight channel connections for each RVON-C card.

If a dot (•) is seen in the display, this means that the channel is not

connected to a RVON device.

If a checkmark () is seen in the display, this means that the channel is

connected to a RVON device.

Panels . . . . . . . . - displays whether or not there is a keypanel connected at the other end

of the channel connection.

Each dot (or checkmark) represents a channel connection. There are

eight channel connections for each RVON-C card.

If a dot (•) is seen in the display, this means that the channel is not

connected to a keypanel.

If a checkmark () is seen in the display, this means that the channel is

connected to a keypanel.

NOTE: Channels are ordered from left to right.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 58 59

Brak uwag

RTS XCP-ADAM-MC Instrukcja Użytkownika Strona 23