RTS KP-12 Instrukcja Użytkownika Pobierz pdf (Strona 59)

KP-12 Keypanel Menu Mode 51

Bosch Security Systems, Inc.

User Manual

F.01U.193.243

Rev. 11

Menus, SERVICE, OPTO-ISO (KP-12 with GPI Module Only)

The Opto-ISO menu configures the four opto-isolated inputs of the optional General Purpose Interface (GPI) module. These

inputs can activate keys, local relays, groups, and setup pages.

1. Select OPTO-ISO.

The call waiting window displays OPT1.

2. Turn the SELECT control to select any unused opto-isolator (OPT1-OPT4) then tap SELECT.

3. Turn the SELECT control to scroll through the assignment options (See Table 7 on page 51). Then, select an option.

• If you select a group or local relay, the assignment occurs immediately and no confirmation is given. To

check the assignment, use the DISPLAY selection.

• If you select KEY, TAP KEY displays in the call waiting window. Tap an intercom key to assign that key to

be activated by the opto-isolator input. No confirmation of the assignment is given. To check the assignment,

use the DISPLAY selection.

• If you select a setup page, the call waiting window displays TAP KEY. Tap any intercom key on the panel

where you want to assign the setup page. No confirmation of the assignment is given. To check an

assignment, use the DISPLAY selection.

• If you select CLEAR, the assignment for that opto-isolator input, one of the following indications is given:

• If the opto-isolator is assigned to a group or relay, the group or relay number will display in the call

waiting window.

• If the opto-isolator is assigned to actuate an intercom key, the key number will appear in the call waiting

window. KEY 0 corresponds to the first key at the left end of the keypanel.

• If the opto-isolator is assigned to a setup page, the setup page number and the panel to which it is

assigned will appear in the call waiting window.

TABLE 7. OPTO-ISO Assignment Options (KP-12 with GPI Module Only)

Name Description

CLEAR Clears current assignment

DISPLAY Displays current assignment, N/A if not assigned

GRP1 Assigns input to actuate Group 1

GRP2 Assigns input to actuate Group 2

GRP3 Assigns input to actuate Group 3

GRP4 Assigns input to actuate Group 4

KEY Assigns input to actuate a key

LRY1 Assigns input to actuate local relay 1

LRY2 Assigns input to actuate local relay 2

PAGE 1 Assigns input to actuate setup page 1

PAGE 2 Assigns input to actuate setup page 2

PAGE 3 Assigns input to actuate setup page 3

PAGE 4 Assigns input to actuate setup page 4

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

Brak uwag

RTS KP-12 Instrukcja Użytkownika Strona 59