RTS XCP-ADAM-MC Instrukcja Obsługi Pobierz pdf (Strona 11)

Each LCP-32 adjusts the listen levels for 16 keypanel keys, and you can connect as many LCP-32 panels as

required to adjust all keys on the KP-32 and on an optional EKP-32 Expansion Panel. An interconnect

cable is supplied with each LCP-32. Connect the first LCP-32 to the LCP connector on the KP-32. Connect

the second LCP-32 to the first LCP-32, and so forth. Note, when arranging LCP-32 panels in an equipment

rack, you should put them directly above or below the keys they will be used to adjust. See also, “Service

Menu, LCP-32”, page 40.

Frame Connector

Use either of the

Frame

connectors (but not both) to connect to an intercom port of the intercom system.

The intercom port you connect to should agree with the address that you set previously. Cable wiring

diagrams are shown in Figure 1 and Figure 2.

DE-9P (MALE)

TO KEYPANEL

DE-9S (FEMALE)

TO INTERCOM SYSTEM*

CABLE TYPE:

BELDEN 8777

DATA

AUDIO TO MATRIX

AUDIO FROM MATRIX

When connecting to an ADAM CS back panel, use

only low-profile cable connectors such as AMP

Part No. 747516-3 (Telex Part No. 59926-678)

IMPORTANT!

Figure 1. DE9S Intercom Cable Wiring

3 TWISTED PAIR TELEPHONE CABLE

DATA -

AUDIO FROM MATRIX +

AUDIO TO MATRIX -

DATA +

123456

CONTACTS

LATCH

RJ12 MODULAR PLUG

AMP 5-555042-3 or equivalent

(View from cable entrance)

Use AMP Chordal

Crimp Tool 231648-1

or equivalent

PAIR 1: AUDIO TO MATRIX

PAIR 2: AUDIO FROM MATRIX

PAIR 3: DATA

AUDIO FROM MATRIX -

AUDIO TO MATRIX +

Figure 2. RJ12 Intercom Cable Wiring

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

Komentarze do niniejszej Instrukcji

Brak uwag

RTS XCP-ADAM-MC Instrukcja Obsługi Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony RTS XCP-ADAM-MC