RTS XCP-ADAM-MC Instrukcja Obsługi Pobierz pdf (Strona 41)

Figure 4. LCP-32 correspondence to KP-32 and EKP-32 keys

For example, you may not want to use LCP-32s with the KP-32 but do want to use them with an EKP-32.

In this case, you must turn off LCP usage for keys 1-32 as follows:

1. Select

, then tap

PGM

displays. This indicates that the first connected LCP-32 will attach to keys 1-16.

3. Tap

PGM

displays. This indicates that the first connected LCP-32 will skip keys 1-16 and will

attach to the next available row of keys.

5. Tap

↓↓

to display

6. Tap

PGM

displays. This indicates that the first connected LCP-32 will skip keys 17-32 and will

attach to the next available row of keys.

8. Tap

CLR

to exit.

9. Run "Service Menu, Save Cfg", page 44, to store the new LCP-32 settings.

Service Menu, Local GPIO

If your KP-32 has an optional Connector Module, you can use this menu item to assign the GPIO inputs

and outputs. Inputs can be assigned to activate intercom keys (including group master keys and a solo key).

Outputs can be activated by intercom keys. Set up inputs and outputs as follows:

Assigning an Input to Activate a Key

1. Select

, then tap

PGM

displays.

3. Tap

PGM

displays.

5. Press

↓↓

↑↑

.to display a different GPI input.

6. Tap

PGM

to select a GPI input.

7. Press

↓↓

to select

8. Tap

PGM

displays.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Komentarze do niniejszej Instrukcji

Brak uwag

RTS XCP-ADAM-MC Instrukcja Obsługi Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony RTS XCP-ADAM-MC