RTS KP95 Instrukcja Użytkownika Pobierz pdf (Strona 34)

Advant Controller 31 / Issued: 07.99

Hardware 07 MK 92 R1161

8 .2

07 KT 94

Basic Unit

Advant Controller 31

Serial Comm. Processor

Advant Controller 31

07 MK 92

RUN

ERR

Supp.

LED

40-pole ribbon cable

Connection part

Note: Attachment and disconnection of units on the networking

interface may only be performed when all supply voltages

are switched off.

Fig. 11: Example: Connecting 07 MK 92 with 07 KT 94

Mounting the expansion housing

1. Detach the cover on unit 07 KT 94 from the network-

ing interface.

2. Plug the socket strip of the 40-pole ribbon cable se-

cured to the 07 MK 92 onto the networking connector

of the 07 KT 94.

3. Place both units on a level surface and slide them to-

gether so that they engage.

4. Slide in the connection part to fix the housing in posi-

tion.

Note: Mounting of the 07 MK 92 to 07 KR 91 / 07 KT 92 /

07 KT 93 takes place in the same way.

1.3.5 Networking interface

The networking interface, a special parallel interface, al-

lows the 07 MK 92 communication module to be connected

to AC31 basic units (such as 07 KR 91 R353, 07 KT 92,

07 KT 93, 07 KT 94). The housing of the communication

module is connected to the housing of the AC31 basic

unit by a snap-fit connection. The electrical connection is

via a 40-pole ribbon cable with socket connector, soldered

onto the 07 MK 92 side.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

Brak uwag

RTS KP95 Instrukcja Użytkownika Strona 34