RTS KP95 Instrukcja Użytkownika Pobierz pdf (Strona 53)

Advant Controller 31 / Issued: 07.99

7 Hardware 07 KP 93 R1161

8 .3

07 KT 94

Basic Unit

Advant Controller 31

07 KP 93

RUN

ERR

Supp.

LED

Do not connect

Do not

connect

Do not connect

1.3.5 Networking interface

The communication processor can be connected to AC31

basic units of the 90 series which have a networking in-

terface. The housing of the communication processor is

40-pole ribbon cable

Connection part

Note: Attachment and disconnection of units on the networking

interface may only be performed when all supply voltages

are switched off.

Fig. 8: Example: Connecting 07 KP 93 with 07 KT 94

Mounting the expansion housing

1. Detach the cover on unit 07 KT 94 from the network-

ing interface.

2. Plug the socket strip of the 40-pole ribbon cable se-

cured to the 07 KP 93 onto the networking connector

of the 07 KT 94.

3. Place both units on a level surface and slide them to-

gether so that they engage.

4. Slide in the connection part to fix the housing in posi-

tion.

connected to the housing of the AC31 basic unit by a snap-

fit connection. The electrical connection is via a 40-pole

ribbon cable with socket connector, soldered onto the

07 KP 93 side.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 89 90

Brak uwag

RTS KP95 Instrukcja Użytkownika Strona 53